english,
español,
deutsche,
português
Box Building Jig
I was expanding my beekeeping and bought a lot of new equipment so I decided to build a jig
to assemble the boxes. Here are pictures.
First picture is the hive box jig without the follower boards. Second is the follower
boards being put in. The third is ends being put in the jig. The fourth is
the sides being put on. The fifth is the sides being hammered into place with
a mallet. The sixth is the sides being nailed. The seventh is the jig being
flipped to do the other side. The eighth is the jig being removed after nailing
the other side. The ninth is the follower boards being removed from the
middle of the boxes.
Michael Bush
Copyright 2006 by Michael Bush
Bush Bees Home
|